FAG UCFL 205, Cast Iron Housing Oval flanged for Insert Bearing
Product Description
General Descriptions
Brand
SKF
Bearing Category
Ball Bearing Round Flanged units
Description
Oval (UCFL) complement our assortment of units to JIS, in addition to the already available FYJ, FYC, and FYTJ series.
At SKF, they have developed a range of ball bearing units called the “UC range” – units that have been designed to be interchangeable with equipment compliant with Japanese Industrial Standards (JIS). SKF UC ball bearing units are designed to operate in environments where systemic vibrations are characteristic application conditions. Solid bases reduce the potential collection of dirt underneath the housing support.
Units compliant with Japanese Industrial Standards (JIS) are available with different locking methods:
Secured set screw locking
One of the reasons for failure in a low-speed, highly loaded conveyor application is machine vibration loosening the locking systems. SKF has overcome this problem: a nylon patch creates extra resistance to screw loosening. This feature is available for units, where the set screws are placed at an angle of 62°.Locking by set screws at 120°
Units with designation suffix /H feature a 120° angle between the set screws. This design reduces shaft imbalance and deformation of the bearing when locking. Both effects reduce vibration and make the units more suitable for applications running at high speeds. In addition, this design provides high axial holding power.Adapter locking
UKP and UKPA series units offer adapter locking, which is a fully concentric locking method. This permits the full limiting speed to be achieved, even where using commercial-grade shafts. Make sure to order the appropriate adapter sleeve together with the unit.
Dimensions
| d | 25 mm |
| d1 ≈ | 33.7 mm |
| Db1 | 68 mm |
| A | 27 mm |
| A1 | 13 mm |
| A5 | 20.5 mm |
| B | 34 mm |
| B1 | 34 mm |
| B4 | 5.5 mm |
| J | 99 mm |
| H | 130 mm |
| L | 68 mm |
| N | 16 mm |
| S1 | 19.7 mm |
| T | 35.7 mm |
Threaded hole
| RG | 1/4-28 UNF |
| R1 | 17.5 mm |
| Ra | 45° |
Grease fitting
| DN | 6.6 mm |
| SWN | 7.94 mm |
| GN | 1/4-28 UNF |
Calculation data
| Basic dynamic load rating (C) | 14 kN |
| Basic static load rating (C0) | 7.8 kN |
| Fatigue load limit (Pu) | 0.335 kN |
| Limiting speed | 5850 r/min |
| with shaft tolerance h6 |
Mass
| Mass bearing unit | 0.61 kg |
Mounting information
| Thread grub screw (G2) | M6x1 |
| Hexagonal key size for grub screw (N) | 3.05 mm |
| Recommended tightening torque for grub screw | 4 N·m |
| Recommended diameter for attachment bolts, mm (G) | 14 mm |
| Recommended diameter for attachment bolts, inch (G) | 0.5625 inc |
Included products
| Housing | FL 205 |
| Bearing | UC 205 |
Product Picture
Packing , Payment , Delievry and Stock
-
Packaging 1)Commercial Bearings packaging: 1pc/plastic bag + color box + carton + pallet 2)Industrial Bearings packaging a)plastic tube + carton + pallet b). plastic bag +kraft paper + carton + pallet 3)According to the requirement of customers' Payment 1) T/T:30% deposit, 70% should be paid before shipment. 2) L/C at sight. (high bank charge, not suggest, but acceptable ) 3) 100% Western Union in advance. (especially for air shipment or small amount) Delivery 1) Less than 45 KGS, we will send by express. ( Door to Door, Convenient ) 2) Between 45 - 200 KGS, we will send by air transport. ( Fastest and safest, but expensive ) 3) More than 200 KGS, we will send by sea. ( Cheapest, but long time ) Stock 1)Availability and supply capacity on a certain basis