JKOS 040 bearing | FAG one side sealed tapered roller bearing JKOS 040

JKOS 040 Bearing is FAG one side sealed tapered roller bearing,the main dimensions is 40mmx68mmx21mm. weight is 0.3 KG.

The bore and outside diameter of FAG one side sealed tapered roller bearing JKOS 040 match those of tapered roller bearings of series 320.

FAG one side sealed tapered roller bearing JKOS 040 can be applied to Agricultural machinery,Fork lift trucks,Cranes and Cable cars.

FEATURES OF FAG ONE SIDE SEALED TAPERED ROLLER BEARING JKOS 040 :

FAG one side sealed tapered roller bearing JKOS 040 are ready-to-fit, easily mounted units.
The single row JKOS 040 bearing is sealed on one side and lubricated for life with a high quality grease. The selfretaining bearings are installed in pairs to give a bearing arrangement that is sealed on both sides.
Due to their large support base, the JKOS 040 bearing arrangement can support all load combinations comprising radial forces, axial forces and tilting forces. The support base is significantly larger than in double row cylindrical roller bearings.

FAG ONE SIDE SEALED TAPERED ROLLER BEARING JKOS 040 BASIC DIMENSIONS AND SPECIFICATION:

New Model/Bearing number: JKOS 040
Old Model/Old number: JKOS 040
Main demensions: 40 mm × 68 mm × 21 mm
Inside diameter (ID d): 40 mm
Outside diameter (OD D): 68 mm
Thickness/width (T/B/H): 21 mm
Basic dynamic load rating (Cr): 53 kN
Basic static load rating (Cor): 71 kN
Reference speed (Grease rpm): 4550 r/min
Weight, Mass (M): 0.3 kg
Category: Tapered Roller Bearings